The AirDrive Serial Logger Module is a serial and RS-232 logging module available as a PCB module with terminal block connectors. It can be accessed with any Wi-Fi device such as a computer, laptop, tablet, or smartphone.
$104.99 / €95.99
Manufacturer product number:
Gross weight (inc. packaging):
0.1kg / 0.2 lbs
Size (inc. connectors):
72mm x 16mm x 16mm
The AirDrive Serial Logger Module is a modular asynchronous serial logger, capable of recording RS-232 data streams from devices like printers, GPS receivers, terminals, keyboards, mice, barcode scanners etc. Connect the device either to a single serial source, or in-line on a serial bus. Connect +5V through USB or +9V...+24V DC power through the terminal connector. The AirDrive Serial Logger Module will immediately start logging all data available on the bus, both upstream and downstream (RX and TX). No software or drivers are required.
All AirDrive devices act as Wi-Fi hotspots. You can connect to them with any Wi-Fi device, such as a smartphone, tablet, or laptop without even touching the device! The AirDrive device will then present a webpage with the data log and configuration options. No additional software or drivers necessary.
Configuring the AirDrive Serial Logger Module is quick and simple. The only parameters that need to be set are the serial bus characteristics, such as the baudrate, bit count, parity and stop bits. This can be done in less than a minute through the configuration webpage.
The Pro version adds a powerful set of features centered around the capability to act both as a Wi-Fi hotspot, and a Wi-Fi device with Internet connectivity. This unleashes a broad set of options, such as email reporting, time-stamping, and live data streaming.
The Max version has all the capabilities of the Pro version, enhanced with 16GB internal memory available as a USB Hi-speed flash drive (480 Mbps). For a serial device, this essentially means unlimited data storage, accessible both remotely and locally over USB.